A bucket elevator is suitable for lifting from low places to high places. After the supplied materials are put into the hopper through the vibration table, the machine will automatically and continuously run and transport upward. The conveying speed can be adjusted according to the conveying volume, and the lifting height can be selected as needed. The hopper is designed and manufactured by ourselves. The PP non-toxic hopper makes this bucket elevator more widely used. All dimensions are designed and manufactured according to the actual needs. It is intended for supporting vertical packaging machines and computer metering machines and is suitable for the lifting and feeding of food, medicine, industrial chemical products, screws, nuts, and other products; the automatic stop and start of the machine can be controlled through the signal recognition of the packaging machine.
The hopper scoops up the materials from the storage below. As the conveyor belt or chain is lifted to the top, it will bypass the top wheel and turn down. The bucket elevator will dump the materials into the receiving tank. The bucket elevators' drive belt generally adopts a rubber belt installed on the lower or upper drive drum and the upper and lower steering drum. Chain-driven bucket elevators are generally equipped with two parallel transmission chains, with a pair of transmission sprockets at the top or bottom and a pair of steering sprockets at the bottom or top. Bucket elevators generally have casings to prevent dust from flying into bucket elevators.Bucket elevator: It is suitable for lifting from low to high. After the supplied materials are put into the hopper through the vibration table, the machine will automatically and continuously run and transport upward.
Address
Luotuo Industrial Area, Zhenhai District, Ningbo City, China
Tel
Raydafon