The SNU-VD 3/70 is a series of double reduction worm gear units that can be used for slow-speed machinery. It has a minimum transmission ratio of 75:1 and a maximum of 4900:1, making it suitable for underdrive, overdrive and vertical assembly conditions. Our company provides Elecon brand replacement worm reducers that are of high quality and affordable. We emphasize that our products are replacement parts and not original equipment. If you need to purchase original equipment, please contact the original supplier for purchase.
The double reduction worm gear unit of the SNU-VD 3/70 series consists of two single reduction worm gear units. The main worm unit is specially designed to be installed as a whole on the standard single worm unit that makes up the secondary stage. The entire gear device is compact, sturdy, and suitable for slow moving machinery. The range of transmission ratios is wide, from 75:1 to 4900:1. These gear devices are particularly suitable for high torque and low-speed drive. The worm gear transmission conforms to BS-721 standard.
The dimensions of the SNU-VD 3/70 worm gear unit can be found in the following table:
| Type | A | B | C | D | E |
|---|---|---|---|---|---|
| SNU-VD 3/70 | 125 | 100 | 260 | 220 | 120 |
The SNU-VD 3/70 worm gear unit is suitable for a wide range of applications, including:
Each of these applications has its specific requirements and the SNU-VD 3/70 worm gear unit can be customized to meet these needs. For example, the gearbox can be designed with a specific gear ratio or shaft configuration depending on the application.
When using and maintaining the SNU-VD 3/70 worm gear unit, please keep the following in mind:
| Problem | Cause | Solution |
|---|---|---|
| Low efficiency | Incorrect gear ratio | Adjust the gear ratio according to the requirements of the application |
| Excessive noise | Loose gear parts or worn gears | Tighten the gear parts or replace the worn gears |
| Overheating | Insufficient lubrication | Check the lubrication system and add lubricating oil if necessary |
| Leakage of lubricant | Worn seals or loose bolts | Replace the worn seals or tighten the loose bolts |
| Severe vibration | Unbalanced load or misaligned shafts | Adjust the load or realign the shafts |
| Abnormal wear | Incorrect use or insufficient maintenance | Use the gearbox correctly and perform regular maintenance |
| Motor overload | Excessive load or incorrect selection of motor | Reduce the load or select a suitable motor |
| Motor failure | Overheating or electrical malfunction | Replace the motor or check the electrical system |
Our company provides Elecon worm gear unit replacement that offers several advantages, including:
We emphasize that our products are replacement parts and not original equipment. If you need to purchase original equipment, please contact the original supplier for purchase. We also welcome customers to provide drawings and samples for customization.
The SNU-VD 3/70 worm gear unit and electric motors are interdependent and complementary components of a power transmission system. The motor provides the power to drive the worm unit, which in turn reduces the speed and increases the torque to the driven load. Our company provides a wide range of electric motors that are compatible with the SNU-VD 3/70 worm gear unit, including AC motors, DC motors, servo motors, and stepper motors. Our motors are of high quality, energy-efficient, and reliable, ensuring that your power transmission system runs smoothly and efficiently.
With more than 20 years of experience in the design, production, manufacture, and sales of gearboxes, our company has introduced advanced production and testing equipment at home and abroad, employing industry professionals and technicians to carry out innovative research and development and manufacturing. We use standardized production management methods to strictly control every aspect of gearbox production, over the years has been to provide customers with high-quality, high-energy-efficiency, high-stability production. Our gearboxes are widely used in the equipment industry, food industry, car washing industry, packaging industry, transmission industry, automation industry, solar energy industry and so on. We welcome and trust by customers.
A: The maximum transmission ratio of the SNU-VD 3/70 worm gear unit is 4900:1.
A: Yes, the SNU-VD 3/70 worm gear unit can be customized to meet specific requirements, such as a specific gear ratio or shaft configuration.
A: Yes, our company provides excellent after-sales support that ensures your satisfaction with our products.
Address
Luotuo Industrial Area, Zhenhai District, Ningbo City, China
Tel
Raydafon