(H201602) Agricultural Machinery Knife Guard For Harvester Parts

H201602 Agricultural Machinery Knife Guard For Harvester Parts

Material:	65Mn or T9
Hardness:	HRC50-55, Induction hardening process guarantees long wear
Thickness:	2.00-2.8mm
Teeth:	Pressing or MillingUpper serrated and under serrated knife sections with any special teeth number
Surface:	Only with anti-rust oil; varnish stoving; galvanized; Chrome finish; blueing, etc,Different surface treatment to protect against corrosion
Colors:	natural varnished, red or green varnish, chromated sections or as requested
Other advantage	End section / half section, which reduces troublesome cutter bar clogging in thick and badly tangled crops

 

Introduction

Agricultural machinery knife guard for harvester parts is an essential component that protects the harvester blades from damage during operation. It is located in the cutting area and plays a crucial role in ensuring smooth and efficient harvesting.

Advantages of Our Product

• We can produce this product and replace most of the commonly used models of parts.
• We offer customization services for this product.
• Our product is durable and of high quality.

Compatible Brands and Models

We can adapt our agricultural machinery knife guard for harvester parts to fit the following commonly used harvester brands and models.

Brand	Model
John Deere	S690
New Holland	CR8090
Case IH	Axial-Flow 9240

Other Agricultural Machinery Parts We Offer

We provide a wide range of agricultural machinery parts, including agricultural chains, agricultural gearbox, pulley, sprocket, coupling, pto shaft, concave, and more. Whatever agricultural machinery parts you need, you can find them here.

Commonly Worn Parts of Harvester

Harvesters are complex machines with many moving parts. Some of the most commonly worn parts include:

1. Blades/Cutting Components: These include the main cutting blade, knife guard, and cutting blade drive belt.
2. Threshing Drum and Concave: These components are responsible for separating the grain from the rest of the plant material.
3. Separation Screen and Cleaning Fan Blades: These components help separate the grain from the debris.
4. Conveyor Chains and Sprockets: These are responsible for moving the harvested crop from one place to another.
5. Rubber Tracks or Tires: These need to be replaced when they become worn or damaged.
6. Hydraulic Components: These include hydraulic cylinders, hoses, and seals.
7. Bearings: Bearings can wear out over time and need to be replaced.
8. Filters: Air filters, fuel filters, and oil filters all need to be replaced periodically.

When to Replace Worn Parts

There are several signs that a harvester needs worn parts replaced:

1. Poor Harvesting Results: If there is too much crop residue left behind, or if the grain is not separated cleanly, this may be a sign of serious wear on the threshing drum and concave.
2. Loss of Power or Overheating: If the engine is not producing enough power or if it is running too hot, it may be because the air filter is clogged or there is a problem with the cooling system.
3. Decreased Harvesting Efficiency: If the cutting blade is moving too slowly or the crop is being transported too slowly, this may be due to a problem with the drive belts, chains, or gears.
4. Difficulties with Mobility or Excessive Noise: Loose or cracked rubber tracks or tires can cause difficulties with mobility, while excessive noise may indicate a problem with the bearings.
5. Unstable Hydraulic Systems: Slow lifting or steering may indicate a problem with the hydraulic pump, cylinders, valves, or seals.
6. Leaking Fluids: Oil, hydraulic fluid, or fuel leaks may indicate a failed seal or other damaged part that needs to be replaced.

Author: Miya