High quality agricultural spare parts rasp bar used harvester AZ58904

 

High Quality Agricultural Spare Parts Rasp Bar Used Harvester AZ58904

ITEM NAME:	Rasp bar
NO.:	4B3008
OEM NO.:	Z35644
Application:	JD C100, W80, W70, C110, W50

 

ITEM NAME:	Rasp bar
COMBINE NO.:	4B3009
OEM NO.:	Z35643
Application:	JD C100, W80, W70, C110, W50

 

ITEM NAME:	Rasp bar
NO.:	4B3010
OEM NO.:	AH134145 /AH205119
Application:	JD CTS, CTS II, 9400, 9410, 9450, 9500, 9500SH, 9501, 9510, 9510SH, 9550, 9550SH, 9560, 9560SH, 9650CTS

 

ITEM NAME:	Rasp bar
NO.:	4B3011
OEM NO.:	AH134144 /AH205120
Application:	JD CTS, CTS II, 9400, 9410, 9450, 9500, 9500SH, 9501, 9510, 9510SH, 9550, 9550SH, 9560, 9560SH, 9650CTS

 

ITEM NAME:	Rasp bar
NO.:	4B3040
OEM NO.:	AZ58904
Application:	JD T550,T560,W540,W550

Product Introduction

The rasp bar is an important spare part used in harvesters. It is mainly responsible for separating the grain from the straw and other crop residues. The quality of the rasp bar directly affects the efficiency and effectiveness of the threshing process.

Function and Working Principle in Harvester

The rasp bar is located in the threshing cylinder of the harvester. When the cylinder rotates, the rasp bar rubs against the crop residues to remove the grain. The grain is then separated from the crop residues by the concave and other components of the harvester.

Our Advantages

• We can produce high-quality rasp bars that can replace most of the commonly used models from different brands.
• We can customize the rasp bars according to the specific needs of our clients.
• Our rasp bars are made of durable materials and have a long service life.

Compatible Brands and Models

Brand	Model
John Deere	STS, S Series, T Series
Claas	Lexion, Dominator, Medion, Mega
New Holland	CR, CX, TX, TF

Other Agricultural Machinery Parts

In addition to rasp bars, we also provide a wide range of other agricultural machinery parts, including agricultural chains, agricultural gearbox, pulley, sprocket, coupling, pto shaft, and concave.

Commonly Worn-out Parts in Harvester

1. Blades/cutting components: including the main cutting knife, protective shield, and cutting knife drive belt.
2. Threshing drum and Concave: responsible for separating the grain from the crop residue.
3. Sieves and fan blades: for separating impurities from the harvested grain.
4. Conveyor chains and sprockets: for conveying the harvested crops.
5. Rubber tracks or tires: for providing traction and stability while the harvester is in operation.
6. Hydraulic components: including hydraulic cylinders, hoses, and seals.
7. Bearings: for supporting the rotating parts of the harvester.
8. Filters: including air filters, fuel filters, and oil filters.

Below is a picture of a typical harvester:

When to Replace Worn-out Harvester Parts

1. Poor Harvesting Performance: If there is too much residue left after harvesting, or if the grains are not being separated properly, it may be a sign of worn-out threshing drum and concave.
2. Power Reduction or Overheating: If the engine is underpowered, or the temperature is too high, it may be a sign of a clogged air filter or a fault in the cooling system. Appropriate action should be taken immediately to replace the air filter or repair the cooling system.
3. Reduced Harvesting Efficiency: If the cutting components are not working properly, or the conveyor chains, sprockets and gears are worn out, it may reduce the speed and efficiency of the harvester. These components should be checked and replaced accordingly.
4. Difficulty in Moving or Increased Noise: If the rubber tracks or tires are worn out or damaged, or if there is abnormal noise during operation, it may be a sign of a damaged bearing. Appropriate action should be taken to replace the worn-out parts.
5. Unstable Hydraulic System: If the hydraulic system is not working properly, it may be due to damaged hydraulic pump, cylinder, valves or seals. These components should be checked and replaced as needed.
6. Oil Leakage: If there is a significant amount of oil leakage, it may be due to damaged seals or other components. The damaged components should be replaced promptly.

Author: Miya