The SNU-UD 3/60 Worm Gear Unit is a series of double reduction worm gear units that can be used for under-driven, over-driven and vertical mounting conditions. The transmission ratio ranges from 75:1 to 4900:1, making it ideal for slow-moving machinery. Our company provides Elecon brand replacement worm reducers that are of high quality and affordable, but please note that these are replacement parts and not original factory parts. If you need to purchase original factory parts, please contact the original supplier.
The SNU-UD 3/60 Worm Gear Unit is a double reduction worm gear unit composed of two single reduction worm gear units. The main worm unit is specially designed to be mounted as a whole on the standard single worm unit forming the second stage. The entire gear device is compact and sturdy, making it suitable for slow-moving machinery. The transmission ratio is very wide, ranging from 75:1 to 4900:1. These gear devices are especially suitable for high torque and slow speed driving. The worm gear transmission meets the BS-721 standard.
The SNU-UD 3/60 Worm Gear Unit is suitable for a wide range of applications, including:
For more specific details, please refer to the following:
When installing, using, and maintaining the equipment, please note the following:
| Problem | Cause | Solution |
|---|---|---|
| Abnormal noise during operation | Insufficient lubricant, gear wear | Add lubricant, replace worn gears |
| Gear wear | Long-term overload operation | Reduce load, repair or replace gears |
| Oil leakage | Damaged oil seal | Replace the damaged oil seal |
| Unstable operation | Unbalanced load, belt slippage | Adjust load balance, adjust belt tension |
| Shaft breakage | Long-term overload operation, improper use | Reduce load, use properly |
| Abnormal vibration | Loose fasteners, damaged bearings | Tighten fasteners, replace damaged bearings |
| Abnormal heating | Insufficient lubricant, bearing damage | Add lubricant, replace damaged bearings |
| Abnormal wear | Impurities in the lubricating oil, poor lubrication | Use clean lubricating oil, improve lubrication |
Our company provides high-quality and affordable replacement SNU-UD 3/60 worm reducers of Elecon brand. The advantages of choosing our replacement parts are as follows:
Please feel free to explore our products and contact us for purchase. If you need to purchase original factory parts, please contact the original supplier.
The motor and worm reducer are important components of the transmission system. The motor provides power to the worm reducer, which in turn reduces the speed and increases the torque to drive the load. Our company not only provides various types of high-quality worm reducers, but also provides various types of electric motors for customers to choose from. We are committed to providing customers with comprehensive transmission solutions.
At Raydafon, we are a comprehensive transmission equipment manufacturer integrating research and development, manufacturing, and sales of speed reducers. We have more than 20 years of experience in the design, production, manufacture, and sales of gearboxes, serving customers in Europe, America, Africa, Asia, etc., and have won the praise of the market. Our consistent mission and vision over the years, our company has introduced advanced production equipment and testing equipment at home and abroad, employing industry professionals and technicians to carry out innovative research and development and manufacturing, the use of standardized production management methods to strictly control every aspect of the production of reducers, over the years has been to provide customers with high-quality, high-energy-efficiency, high-stability production. Our gearboxes are widely used in equipment Industry, food industry, car washing industry, packaging industry, transmission industry, automation industry, solar energy industry and so on. We welcome and trust by customers.
Please feel free to contact us for more information and purchase!
A: No, the SNU-UD 3/60 Worm Gear Unit is suitable for slow-moving machinery due to its wide transmission ratio range.
A: Yes, the gear unit can be customized upon customer's request.
A: No, the replacement parts are not original factory parts. If you need to purchase original factory parts, please contact the original supplier.
Address
Luotuo Industrial Area, Zhenhai District, Ningbo City, China
Tel
Raydafon