Blueline PTO Shaft Replacement with Overload Clutch - Series F21 1010mm, Profile pair G1/G2

BLUELINE pto shaft

Further information

universal joint size A profile (mm):

22 x 54,8

Universal joint size B profile (mm):

22 x 54,8

Size:

F21

Tractor version:

1 3/8" 6 splines

Implement version:

1 3/8" 6 splines

Lz (mm):

1010

Torque (Nm):

650

Connection:

Shear bolt clutch

Profile:

With lemon profile

Profile pair:

G1/G2

A (profile):

1 3/8" 6 Z?hne

B (profile):

1 3/8" 6 Z?hne

Locking system:

Quick-release pin/clamping bolt

Additional information:

Operating instructions included

EAN codes:

4059139305568

To be found in category:

PTO shafts & drive technologySearch filters: PTO shaftsPTO shafts with overload clutches

Introduction of PTO Shaft

Power Take-Off shafts, or PTO shafts, are essential components of any agricultural machinery. They transfer the power from the tractor to the machinery. Here are some key features of a PTO shaft:

• Available in various sizes and lengths to fit different tractors and machinery.
• Equipped with universal joints to allow for angular motion.
• Can handle high torque loads.
• Often comes with a safety guard to protect the user.
• Complete with quick-release and shear bolt clutch for easy connection and disconnection.

Overload Clutch and Its Significance

An overload clutch is a crucial part of a PTO shaft. It offers the following benefits:

• Protection of the drive system: It acts as a safeguard for the drive system during abnormal load or overload conditions by reducing torque transfer and preventing damage to the drive components.
• Prevention of accidents: It can prevent accidents that can occur if the drive system loses control due to excessive load, causing equipment damage, instability, or even endangering the operator's safety.
• Adaptation to load fluctuations: Overload clutches can flexibly adapt to these load fluctuations, maintain the smooth operation of the drive system, and avoid system instability or damage due to sudden load increases.
• Adjustment and protection of the power source: Not only does it protect the drive system, but it also adjusts and protects the power source. When the load suddenly increases, the torque transferred to the power source may exceed its capacity. The overload clutch prevents this from happening.

PTO Shaft with Overload Clutch

We manufacture PTO shafts with overload clutches. Our PTO shafts are of the same size and have the same installation method as the Blueline PTO shaft, making them a perfect replacement.

Selecting the Right PTO Shaft

To select the right PTO shaft, you need to consider the following parameters:

• Length: The distance from the drive device to the receiving device.
• Rated Power.
• Type of shaft and connection method.
• Torque transmission capability.
• Environmental requirements: Protective cover, sealing performance, and durability, etc.
• Safety features: Reliable anti-card sleeve device, anti-card pin, etc.
• Compatibility.
• Certificates: CE certification.

Importance of CE Certification

A CE certificate is crucial for a PTO shaft for the following reasons:

• Ensures that the PTO shaft complies with the relevant regulations and standards of the European Union, providing basic safety guarantees.

• CE certification is a prerequisite for selling PTO shafts in the European market.
• Provides a reliable guarantee for the safety performance of the PTO shaft.
• A PTO shaft with a CE certification communicates confidence in product quality and safety.

Our Certifications

Our PTO shafts have CE, TS/16949, and ISO 9001 certificates. Take a look at them here:

Structure of a PTO Shaft

A PTO shaft consists of a Housing, Drive Shaft, Universal Joint, Protective Cover, and Connectors. Let's explore each part and its material:

Use Cases of PTO Shaft

PTO shafts are used in various scenarios:

• Agricultural machinery: They are typically used to connect tractors and agricultural equipment such as lawnmowers, harvesters, straw crushers, sprayers, mixers, etc.
• Industrial equipment: PTO shafts are used to drive various rotating equipment like pumps, generators, centrifuges, mixers, etc.
• Transport equipment: PTO shafts are also used to drive certain transport equipment like trailers, semi-trailers, and tow trucks.
• Solar systems: PTO shafts are usually used to enable the rotation and adjustment of tracker photovoltaic panels.

Adjusting the Length of a PTO Shaft

To adjust the length of a PTO shaft, follow these steps:

• Remove the plastic protective cover.
• Shorten the inner and outer tubes according to the required length, both the inner and outer tubes should be shortened the same length at once.
• Remove burrs with a file.
• Shorten the inner and outer plastic tubes according to the required length, both the inner and outer tubes should be shortened the same length at once.
• Oil the inner tube of the steel tube, then reinstall the PTO shaft plastic protective cover.

About Raydafon Group

Raydafon Group is a leading player in the PTO Shaft market in China. We specialize in the development, manufacture, and marketing of power output shafts, industrial universal joints, and automobile drive shafts. Our products enjoy a high reputation among customers in Europe, the US, Asia, Australia, and North America. We offer customized design and processing, laser printing of logos. We are among the top three professional OEM suppliers to numerous agricultural machinery factories. With CE, TS/16949, ISO 9001 certificates, we have a systematic production equipment and team that guarantees our quality and delivery. In addition, we supply the following related products: agricultural gearboxes, chains, sprockets, pulleys, couplings, and other transmission parts and agricultural machinery parts. Check out our product categories here:

We welcome customers to customize products based on drawings or samples.

Author: Miya