High quality Pulley for JD d harvester AH169549

PRODUCT SPECIFICATIONS

COMBINE NO.:	4C3074
Reference NO.:	673214R91
Application:	1620, 1640, 1644, 1660, 1666, 1670, 1680, 1682, 1688, 2144, 2166, 2188, 2344, 2366, 2377, 2388, 2577, 2588, 5088, 6088, 7088
WT(kg/pc):	1.025

COMBINE NO.:	4C3079
Reference NO.:	AH94450
Application:	6810, 6850, 6950, 6610, 6710, 6650, 6750, 6910
WT(kg/pc):	1.9

COMBINE NO.:	4C3066
Reference NO.:	AH169549
Application:	JD 9000, S500 , S600 , W500, W600
WT(kg/pc):

COMBINE NO.:	4C3075
Reference NO.:	AH204389
Application:	9550, 9550SH, 9650, 9650CTS, 9650STS, 9750STS, 9860SSTS
WT(kg/pc):	2.21

COMBINE NO.:	4C3052
Reference NO.:	Z10428
Application:	JD 330, 530, 730, 925, 935, 945, 930, 932, 950, 952, 955, 965H, 975, 985, 1032, 1055, 1065, 1072, 1085, 965, 1042, 1052, 1068H,1075, 430, 630, 940, 942, 960, 970, 968H
WT(kg/pc):	0.405

Introduction

The High quality Pulley for JD d harvester AH169549 is an important component in the JD d harvester that helps transmit power to different parts of the machine. It is responsible for driving the belt that powers the threshing drum and other important components in the harvester.

Our Product

We can produce this product and it can replace most of the commonly used models of accessories. You can also contact us for customization. Our advantages include:

• High quality materials
• Competitive prices
• Excellent customer service

Compatible Brands and Models

We can adapt to many common brands and models of harvesters, including:

Brand	Model
John Deere	W50, W70, W110, W170, S550, S660, S670, S680
Claas	Lexion, Tucano
New Holland	CR, CX, TX

Other Agricultural Machinery Parts

We also provide other agricultural machinery parts, including agricultural chains, agricultural gearbox, sprocket, coupling, pto shaft, concave, etc.

Commonly Worn Parts

Harvesters have several common wear and tear parts, including:

1. Blades/cutting components: including main cutting blades, protective blades, cutting belt, etc.
2. Threshing drum and concave
3. Separation screen and cleaning fan blades
4. Conveyor chains and sprockets
5. Rubber tracks or tires
6. Hydraulic components: including hydraulic cylinders, hydraulic hoses, seals, etc.
7. Bearings
8. Filters: air filters, fuel filters, and oil filters, etc.

When to Replace Parts

There are several signs that indicate when certain parts in your harvester need to be replaced, including:

1. Poor harvest performance: if there is too much crop residue left after harvesting or the grains are not being separated cleanly, it may indicate that the threshing drum and concave are worn out and need to be replaced.
2. Power decline or overheating: if the engine power is insufficient and the running temperature is too high, it may be due to a clogged air filter or cooling system failure. It is necessary to replace the air filter or check and repair the cooling system in a timely manner.
3. Decreased harvesting efficiency: if the cutting components and material transport speed are slow, it may be due to aging belts, elongated chains, or worn drive gears. It is necessary to check and replace the corresponding belts, chains, or gears.
4. Difficulty in movement or increased noise: if it is a rubber track harvester, loose or significantly cracked tracks need to be replaced, and if it is a tire-type harvester, worn tires need to be replaced. In addition, if there is abnormal noise during movement, it may be due to worn or damaged bearings that need to be replaced.
5. Unstable hydraulic system operation: if the lift or steering response is slow or weak, it may be due to problems with hydraulic pumps, cylinders, valves, or seals. It is necessary to check and replace the corresponding components in a timely manner.
6. Large-scale oil leakage: whether it is oil, hydraulic oil, or fuel leakage, it indicates that the sealing components have failed or other parts are damaged. It is necessary to find the leakage point and replace the damaged sealing components or parts in a timely manner.

Author: Miya