Replacement of Walterscheid PTO Shaft With Overrunning Clutch W400Em 1010mm Profile Pair: 1b/2a

Replacement of Walterscheid pto shaft

Further information

universal jointA profile (mm):

32 x 76

Universal jointB profile (mm):

32 x 76

Size:

400E

Tractor version:

1 3/8" 6 splines

Implement version:

1 3/8?? 6 splines

(mm):

1010

Connection:

Overrunning clutch

Profile:

With lemon profile

Profile pair:

1b/2a

Guard version:

SD 25

Max. speed (1/min.):

540

Lock:

F-ZV/AZG

Type:

W

A (profile):

1 3/8" 6 splines

B (profile):

1 3/8" 6 teeth

Locking system:

Open push-pull lock/open push-pull lock

Weight:

19.00 kg

To be found in category:

PTO shafts & drive technologySearch filters: PTO shaftsPTO shafts with overload clutches

Introduction to PTO Shaft

The Power Take-Off (PTO) shaft is a critical component in many agricultural and industrial machines. It transfers power from the tractor to the machine being towed. Here are five key features of a PTO shaft:

• Universal Joint: This allows the shaft to transmit power effectively even at sharp angles.
• Overrunning Clutch: This prevents the machine from driving the tractor when the latter stops enhancing safety.
• Profile: The profile such as the lemon profile on this Replacement of Walterscheid PTO shaft affects the transmission efficiency and durability of the shaft.
• Locking System: This keeps the shaft securely attached to the tractor and the machine.
• Size: Theof the shaft and its components must match the specifications of the tractor and the machine.

Our PTO Shaft

Our PTO shafts are manufactured with the same dimensions and installation methods as the Replacement of Walterscheid PTO shafts. This makes them perfect replacements for Replacement of Walterscheid PTO shafts. They come with the same universal joint size profile type and other specs as the Replacement of Walterscheid PTO shafts.

Choosing the Right PTO Shaft

Choosing the right PTO shaft involves considering several parameters. These include the distance between the power source and the receiver the rated power the and connection method of the shaft the torque transmission capacity environmental requirements such as the protective cover sealing performance and durability safety features such as a reliable anti-card sleeve device and anti-card pin adaptability and certification such as CE certification.

Our PTO Shaft's CE Certification

Our PTO shafts have CE certification which is crucial for the following reasons:

• It indicates that the PTO shaft complies with relevant European Union regulations and standards.
• It is a necessary condition for selling the PTO shaft in the European market.
• It provides a reliable guarantee of the safety performance of the PTO shaft.
• It instills confidence in the quality and safety of the product.

Our Certificates

We are proud to announce that our PTO shafts have not only CE certification but also TS/16949 and ISO 9001 certifications. You can see our certificates in the image below.

PTO Shaft Structure

Our PTO shafts consist of a housing drive shaft universal joint protective cover and connectors. All these components are made of high-quality materials for durability and efficiency. We also sell these components separately. The image below shows the structure of our PTO shafts.

Applications of PTO Shafts

PTO shafts have various applications in agriculture industry and transportation. They are used in:

• Agricultural machinery such as mowers harvesters straw crushers sprayers mixers etc.
• Industrial equipment such as pumps generators centrifuges mixers etc.
• Transportation equipment such as trailers semi-trailers and tractors.
• Solar systems for rotating and adjusting photovoltaic panels.

Adjusting the Length of a PTO Shaft

Adjusting the length of a PTO shaft involves the following steps:

1. Remove the plastic protective cover.
2. Shorten the inner and outer tubes to the required length. Both tubes should be shortened by the same length.
3. Use a file to remove any burrs.
4. Shorten the inner and outer plastic tubes to the required length. Both tubes should be shortened by the same length.
5. Oil the inner steel tube then reinstall the drive shaft plastic protective cover.

About Raydafon Group

At Raydafon Group we lead the PTO Shaft market in China. We develop manufacture and market power output shafts industrial universal joints and automobile drive shafts. Our products are highly regarded by customers in Europe the US Asia Australia and North America. We support custom designs and processing and offer laser printing of logos. We are among the top three professional OEM suppliers for numerous agricultural machinery factories and have CE TS/16949 ISO 9001 certifications. We have a systematic production facility and team that ensure our quality and delivery. In addition to PTO shafts we also supply agricultural gearboxes chains sprockets pulleys couplings and other drive components as well as agricultural machinery parts. We welcome custom orders based on drawings or samples.

Author: Miya