The Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 877 is a high-powered, efficient, and cost-effective direct-drive with a wide range of installation options. It comes with a ready-made transmission ratio ranging from 8:1 to 16,000:1 and can be interchanged with other leading manufacturers' products without modification. It is designed to offer a high-efficiency, compact solution that meets most requirements. Our company provides Fenner brand replacement of helical worm gearbox, which has good quality and is reasonably priced. It is important to note that our products are replacement parts and not original equipment. If you wish to purchase original equipment, please contact the original supplier.
The housing protects the internal components of the reducer, while the output flange and shaft provide the output connection. The worm gear and shaft work together to provide the reduction in speed and torque.
The performance of the reducer depends on correct installation, lubrication, and maintenance. For Shaft Mounting, it is important to ensure that the shaft and the gear unit hole are clean and free of burrs. Apply a suitable amount of lubricating oil to the shaft and hole to help with assembly and prevent friction corrosion. Slide the device onto the drive shaft, and install the key on the shaft. For Foot Mounting, install the equipment securely on a sturdy structure. Install the output extension shaft as required. The connection between the shafts should use an elastic coupling, and the deviation of the shafts should be within the range of the coupling. When installing belt pulleys or sprockets on two shafts, install them as close to the gearbox as possible. Do not hit the shaft when installing or removing transmission components, as this will damage the bearing.
For oil change, gearboxes with sizes 870 and 871 are lifetime lubricated but require oil changes in explosive environments. Gearboxes of all other sizes require oil changes according to the equipment's operating temperature. New gearboxes should have half of the oil changed after 1000 hours of operation, one year, or at the end of their designated service life. Maintenance should be performed in accordance with the manufacturer's recommendations.
| Problem | Cause | Solution |
|---|---|---|
| Oil Leakage | Worn-out seals or overfilling of lubricant | Replace the seals or reduce the amount of lubricant |
| Overheating | Excessive loading or inadequate lubrication | Reduce the loading or increase lubrication |
| Abnormal Noise | Worn-out or damaged gears or bearings | Replace the gears or bearings |
| Severe Vibration | Misalignment or unbalanced loading | Correct the alignment or balance the loading |
| Decrease in Output Torque | Worn-out or damaged gears or bearings | Replace the gears or bearings |
| Difficulty in Shifting Gears | Improper lubrication or damage to the shift fork or gear | Change the lubricant or replace the shift fork or gear |
| Sudden Stop in Operation | Damage to the output shaft or gear | Replace the output shaft or gear |
| Excessive Noise in Operation | Worn-out or damaged bearings or gears | Replace the bearings or gears |
Our company provides replacement parts for the Fenner brand helical worm gearbox. Our products are of high quality and are priced competitively. It is important to note that our products are replacement parts and not original equipment. If you wish to purchase original equipment, please contact the original supplier.
The Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 877 is designed to work with various electric motors. It is important to choose the right motor to ensure optimal performance. Our company provides various types of electric motors for sale, designed to work with our gearboxes.
The right combination of a worm reducer and electric motor is crucial for the smooth operation of machinery. Our company provides both products to ensure compatibility and optimal performance.
We are a comprehensive transmission equipment manufacturer that designs, produces, and sells speed reducers. With over 20 years of experience, we serve customers in Europe, America, Africa, Asia, and other regions. We have won the market's praise for providing high-quality, high-energy-efficient, and high-stability production. Our gearboxes are widely used in equipment industry, food industry, car washing industry, packaging industry, transmission industry, automation industry, solar energy industry, and other fields. We offer the best service, highest product quality, and most competitive price. Our company has introduced advanced production equipment and testing equipment at home and abroad, employing industry professionals and technicians to carry out innovative research and development and manufacturing. We use standardized production management methods to strictly control every aspect of the production of reducers.
We encourage you to explore our products and contact us for purchases. Our customer service team is ready to help you make an informed decision and answer any questions you may have.
A: Yes, but it is important to follow the manufacturer's recommendations for lubrication and maintenance to ensure optimal performance.
A: Yes, the reducer can be installed on a base, flange, or shaft.
A: The maximum torque is 10,000Nm.
Address
Luotuo Industrial Area, Zhenhai District, Ningbo City, China
Tel
Raydafon