Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 875

Introduction

The Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 875 is a highly efficient and energy-saving direct drive gearbox. It has various installation methods and is available in a range of ready-made transmission ratios from 8:1 to 16,000:1. The gearbox is also interchangeable with the leading manufacturers in the market and can accept standard IEC motors without modification. The modern design technology and high-quality components of the C series helical worm gearboxes make them superior to any other gearbox in terms of low cost/Nm. The C series right-angle series provides a highly efficient and compact solution that meets most requirements. Our company provides replacement Fenner brand helical worm gearboxes that are of high quality and affordable prices. It is important to note that our products are replacement parts, not original ones. If you require original parts, please contact the original supplier for purchase. The following image shows the gearbox:

Features

• The gearbox has a transmission ratio ranging from 8:1 to 16,000:1 and a maximum torque of 10,000 Nm.
• It comes in 8 different specifications with bore sizes ranging from 20 mm to 90 mm.
• The direct drive device is highly efficient with energy-saving gear transmission, reducing energy and operational costs.
• The gearbox can be interchanged with other manufacturers' products in terms of dimensions.
• The innovative motor adapter uses a standard IEC interface.
• The gearbox is oil-free and does not leak oil when the motor is disassembled.
• It has multiple installation methods, including base, flange, and shaft mounting.

The following image shows the various mounting positions:

Applications

• The gearbox is suitable for industrial equipment such as conveyors, mixers, agitators, and elevators.
• It is commonly used in the food industry, car washing industry, packaging industry, transmission industry, automation industry, solar energy industry, and more.
• The following image shows some applications of the gearbox:

Structure

The Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 875 is made up of several components with specific functions, including:

• Worm Gear
• Worm Shaft
• Bearing
• Housing
• Seal
• Output Shaft
• Output Flange
• Coupling

The following image shows the components of the gearbox:

Installation

The performance of the gearbox depends on its correct installation, lubrication, and maintenance. Here are some guidelines for installation:

• Shaft Mounting: Ensure that the shaft and the gearbox hole where the gear unit will be mounted are clean and free of burrs. Apply a sufficient amount of lubricating oil to the shaft and the hole to aid in assembly and prevent friction corrosion. Slide the unit onto the drive shaft, and attach the key.
• Foot Mounting: Mount the equipment stably on a sturdy structure. Install the output extension shaft as required. The connection between the shafts should use an elastic coupling, and ensure that the deviation of the shaft is within the tolerance range of the coupling. When installing pulleys or sprockets on two shafts, install them as close to the gearbox as possible. Do not hit the shaft when installing or removing the drive components to avoid damaging the bearings. The following image shows the Shaft Mounted Reducer:

Lubrication and Maintenance

Proper lubrication and maintenance are critical to the performance of the gearbox. Here are some guidelines:

• Oil Change: Gearboxes of size 870 and 871 are lubricated for life, except when working in explosive environments. All other gearbox sizes require oil changes according to the temperature of the equipment. New gearboxes should have half of the oil changed after 1000 hours of operation or one year, or when the specified service life expires.
• Maintenance: Regularly check the gearbox for leaks and wear of the components. Check the wear of the bearings, oil seals, and gears. Replace them when necessary. The following image shows a Worm Drive Motor:

Fenner Helical Worm Gearbox Replacement

Our company provides replacement Fenner brand helical worm gearboxes that are superior in quality and cost-effective. Here are some of the advantages of our replacement products:

• High-quality and affordable prices
• Direct replacement parts
• Interchangeable with the leading manufacturers in the market

It is important to note that our products are replacement parts, not original ones. If you require original parts, please contact the original supplier for purchase. The following image shows the Worm Gearbox:

Motors for Worm Gear Reducers

Worm gear reducers and motors are inextricably linked. The gearbox converts the high-speed rotation of the motor into a low-speed output, enabling the equipment to run smoothly and steadily. Our company also provides various electric motors for customers to choose from. The following image shows our electric motors:

About Raydafon

We are a comprehensive transmission equipment manufacturer that integrates research and development, manufacturing, and sales of speed reducers. With over 20 years of experience in designing, producing, manufacturing, and selling gearboxes, we serve customers in Europe, America, Africa, Asia, and other regions, earning the trust and praise of the market. Our consistent mission and vision have enabled us to introduce advanced production and testing equipment from home and abroad, employ industry professionals and technicians to carry out innovative research and development and manufacturing, utilize standardized production management methods to strictly control every aspect of the production of reducers, and provide customers with high-quality, high-energy-efficiency, high-stability production. Our gearboxes are widely used in various industries, such as the equipment industry, food industry, car washing industry, packaging industry, transmission industry, automation industry, solar energy industry, and more. We encourage customers to explore our products and contact us for purchase. The following image shows our Worm Gearbox Factory:

Q&A